|
User Manual |
3.6 Time Oven Mode Operation |
|
3.6.1
To Set Time Mode |
|
3.6.2 To Delay the Start of a Timed
Mode |
1. Follow steps 1 through 9
above. 2.
Press [Stop Time] key. The DELAY writing will
appear in the display, beside the stop time and the hour digits will begin
flashing. 3.
Press [+] or [-] to change the hours. 4.
Press [Stop Time] again, hours will be confirmed and
minutes digits will begin flashing. 5.
Press [+] or [-] to change the minutes. Hold the key to
change by 10 minutes steps. 6.
Press [Stop Time] once again or wait for a few seconds
to confirm the whole stop time value. 7.
The clock automatically
calculates the time of day at which the mode starts and stops. The displayed
cooking time counts down by the minute. The oven turns on and heats to the set temperature, for the
selected number of hours and minutes. 8.
At the end of the programmed
cooking time, the oven will automatically turn off. Display will show End and
the oven will beep. Reminder beeps will sound for up to fifteen minutes until
any key is touched. 9.
Whenever it’s necessary to
check a time value that is not displayed, press the corresponding key to view
the desired value for 5 seconds. 10. Example: if the timer value is displayed, press cook time key to view
the cook time for 5 seconds. 11. Timer value is displayed when both timer and cook time are running. |